Type
|
K250 |
K150 |
K125 |
Diameter
|
2-1/2 x 2-1/2 |
1-1/2 x 1-1/2 |
1-1/4 x 1-1/8 |
Thickness
|
0.015 nom. |
0.015 nom. |
0.015 nom |
Material
|
Mild Steel |
Mild Steel |
Mild Steel |
Plating
|
Galv. |
Galv. |
Galv. |
Edges / flat or beveled
|
beveled |
beveled |
beveled |
Other materials available
|
Alum., S.S. |
Alum., S.S. |
Alum., S.S. |
Packaged per carton
|
1000 |
1000 |
1000 |
MIDWEST FASTENERS Self-Locking Washers are used in conjunction with MIDWEST FASTENERS weld pins, insul-anchors and lacing anchors to fasten insulation in place. Simply press the self-locking washer onto the pin up to the insulation until the desired position is reached. Then clip off, (or bend over) the remaining portion of pin for a permanent attachment.
Both Round or Square self-locking washers are available as a matter of design or application preference. The domed, multi-lanced hole design provides for ease of locating washer on pin and positive locking. Most styles of washers are manufactured with a beveled edge to prevent the washer from cutting into the insulation facing.
MIDWEST FASTENERS Self-Locking Washers are available according to the chart above and with standard 10 GA, 3mm, 12 GA, or 14 GA hole sizes off-the-shelf. Other material/plating combinations and hole sizes are available by special order.
Please click the Request Information button to configure your Self-Locking Washers (Square). |